(ProQuest: ... denotes non-US-ASCII text omitted.)
Academic Editor:Chen Wu
Department of Physics, Shanxi University, Taiyuan, Shanxi 030006, China
Received 25 March 2014; Accepted 26 April 2014; 18 May 2014
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The publication of this article was funded by SCOAP3 .
1. Introduction
Collective flows are a common phenomenon of heavy ion collisions at high energy [1-5]. In a noncentral collision of two spherical nuclei, the overlapping zone between the two nuclei is not circular but it rather takes an almond shape, where pressure gradients are formed due to the azimuthal anisotropy. Then, the initial spatial anisotropy of the overlapping zone is converted into momentum space anisotropy of the particle distribution. The momentum distribution of emitted particles is quantified in terms of the Fourier expansion for the particle invariant azimuthal distribution [6]. These are defined by [figure omitted; refer to PDF] where [varphi] n and Ψ n represent the azimuthal angle of an emitted particle in laboratory reference frame and the azimuthal angle of the reaction plane in the same frame, respectively. The v n represents the magnitude of the n th-order anisotropy. The second-order coefficient of the anisotropy flow v 2 is called the elliptic flow, which is related to the almond shape mentioned above. The elliptic flow is one of the key observables measured at the RHIC, where large values of v 2 are considered as a sign of collectivity in the system created in the high-energy collisions. Recently, an event-by-event ideal hydrodynamic model is used to study the elliptic flow of thermal photons in Au + Au collisions at RHIC and Pb + Pb collisions at the LHC, and the results show that there is a persistent tension between experimental data and photons of hydrodynamics [7].
In this paper, we will discuss the elliptic flow in Pb + Au collision at s NN = 17.3 GeV, which is top SPS energy. To extract properties of the matter created in the asymmetry reaction, we improve a multisource thermal model, which was used to describe the particle production in our previous work [8].
2. Azimuthal Anisotropy and Number of Participant Nucleons
The initial transverse coordinate-space anisotropy of the participant region is converted into an azimuthal momentum-space anisotropy [9]. But we obtain the evolution information of such matter by final-state particles measured in detectors [10]. The transverse momentum p T [variant prime] of the particles has an invariant form in different reference fames: [figure omitted; refer to PDF] which is called Rayleigh distribution.
When two ultrarelativistic nuclei collide at a nonzero impact parameter, their overlap area in the transverse plane has a short axis which is parallel to the impact parameter and a long axis which is perpendicular to the impact parameter. Considering the mechanics effect, these sources depart from the isotropic emission. The distribution functions of p x * and p y * are [figure omitted; refer to PDF] where A x , y and B x , y denote the expansion coefficient of the source and the movement coefficient of the source, respectively. For Maxwell's ideal gas, A x , y = 1 and B x , y = 0 , and the nonexpanding source has no contribution to the collective flow. The particle distribution is f p T * , [varphi] * ( p T * , [varphi] * ) . In the final state, the normalized distribution of total particles can be expressed as [figure omitted; refer to PDF] where u and 1 - u denote the contribution of isotropic sources and anisotropic sources, respectively. The 1 - u is proportional to the number of nucleons participating N part : [figure omitted; refer to PDF] where A Pb and A Au are the mass numbers of the Pb and Au, respectively.
In the Monte Carlo calculation, the transverse momenta are given by [figure omitted; refer to PDF] where r 1 , r 2 , r 3 , and r 4 denote random numbers in [ 0,1 ] . According to the measurement in experiments, the elliptic flow in the model is defined as [figure omitted; refer to PDF] It is interesting to note that several different definitions of centralities in A + A collision were given through other quantities because they are not a directly measurable quantity [11]. The centrality can usually be calculated by multiplicity distribution or fractional cross-section or impact parameter b , b 2 / ( R Pb + R Au ) 2 [12]. The R Pb and R Au are radii of Pb and Au, respectively. Theoretically, the number of participant nucleons in a collision of Pb + Au at the impact parameter b is [figure omitted; refer to PDF] They can be estimated easily in the geometry method [13]: [figure omitted; refer to PDF] The nuclear density function ρ Pb / Au is the Woods-Saxon density profile [14]: [figure omitted; refer to PDF] where ρ 0 refers to normal nuclear density and c [approximate] 0.54 fm stands for the nuclear diffusion edge from low energy electron-nucleus scattering experiments [15].
First, in order to check the reliability of the model, Figure 1 presents the transverse momentum spectra of charged pions, charged kaons and protons at midrapidity for Pb-Pb collisions at s NN = 17.3 GeV. The symbols denote the data measured by NA49 Collaboration [16]. The curves denote our results with A x = 3.10 ± 0.45 and σ = 0.44 ± 0.14 . The calculated results agree with the experimental data except for the region of p T < 0.6 GeV/ c .
Figure 1: Invariant p T -differential yields of π + , K + , K , and protons. The experimental data [16] are denoted by the scattered symbols. The theoretical results are denoted by the solid line.
[figure omitted; refer to PDF]
Figure 2 shows elliptic flows v 2 of K S 0 produced in Pb-Au collisions at s NN = 17.3 GeV. The symbols are the data measured by the CERES Collaboration [17] and NA49 Collaboration [18]. Collision centralities are 5.3-13% of σ geo for CERES and top 13% for NA49 data. The curves are our results with A x = 3.10 ± 0.45 , which depends on collision energies and the centrality. The other parameters used in the calculations are k = 0.24 ± 0.04 and σ = 0.45 ± 0.18 . The observed v 2 increases with increasing p T at the low transverse momentum and saturates in p T > 2 GeV/ c . The modeling results are in approximate agreement with the experimental data. Figures 3 and 4 show elliptic flows v 2 of p T for π - and π + produced in Pb-Au collisions at s NN = 17.3 GeV. The symbols denote the data measured by the CERES Collaboration [17]. The curves denote our results. One sees again that the model can approximately describe the elliptic flows in Pb-Au collisions at the top SPS energy.
Figure 2: Differential elliptic flow v 2 ( p T ) of K S 0 . The CERES data [17] and the NA49 data [18] are denoted by the scattered symbols. The theoretical results are denoted by the solid line.
[figure omitted; refer to PDF]
Figure 3: Differential elliptic flow v 2 ( p T ) of negative pion candidates after the HBT correction. The CERES data [17] are denoted by the scattered symbols. The theoretical results are denoted by the solid line.
[figure omitted; refer to PDF]
Figure 4: The same as in Figure 4, but for π - and π + candidates.
[figure omitted; refer to PDF]
In Figure 5, we show differential elliptic flows v 2 ( p T ) of protons in Pb-Au collisions at s NN = 17.3 GeV. In the given centrality, the dependence of v 2 on p T is similar to that for the pion. In Figure 6, we present differential elliptic flows v 2 ( p T ) of K S 0 mesons and Λ hyperons in Pb-Au collisions at s NN = 17.3 GeV. We also see the same behavior for the same centrality like the above figures. In order to understand the azimuthal anisotropy of final-state particles in the asymmetric collision, Figure 7 gives a comparison to the results of NA49 [19] at the same energy s NN = 17.3 GeV and gives a comparison to STAR results [20] at s NN = 200 GeV. The NA49 and CERES data are in reasonably good agreement. In order to compare STAR to CERES results, the former have been rescaled to the centrality used in the CERES experiment. The v 2 values measured at the RHIC energy are 15-20% higher due to the higher beam energy. Our results are in approximate agreement with the data measured by the three collaborations.
Figure 5: The same as in Figure 4, but for the proton.
[figure omitted; refer to PDF]
Figure 6: The same as in Figure 4, but for K S 0 mesons and Λ hyperons.
[figure omitted; refer to PDF]
Figure 7: Comparison of Λ and K S 0 elliptic flow between CERES and NA49 [19] and STAR [20].
[figure omitted; refer to PDF]
3. Conclusions
In the above discussions, we have investigated the azimuthal anisotropy by using the elliptic flow v 2 versus the transverse momentum p T in Pb + Au collisions at the top SPS energy s NN = 17.3 GeV. The amplitude of the azimuthal anisotropy can be measured by the elliptic flow, which is a sensitive probe of the matter created in the collisions. We improve the multisource statistical model to discuss the transverse momentum dependence of elliptic flows for the particles produced in the asymmetric system, Pb-Au collision at the top SPS energy. Considering the collision geometry, the modelling results are obtained in the framework of the multisource statistical model. The results agree approximately with the data of the CERN-CERES/NA45 Collaboration. More importantly, this model has partly described the particle production in high-energy collisions [8]. In the descriptions of elliptic flows v 2 ( p T ) in the asymmetric system (Pb + Au collision) at SPS energies, the present work is a new successful attempt.
Acknowledgments
This work is supported by the National Natural Science Foundation of China under Grants no. 11247250, no. 11005071, and no. 10975095, the National Fundamental Fund of Personnel Training under Grant no. J1103210, and the Shanxi Provincial Natural Science Foundation under Grants no. 2013021006 and no. 2011011001.
Conflict of Interests
The authors declare that there is no conflict of interests regarding the publication of this paper.
[1] B. Abelev, J. Adam, D. Adamová, " D Meson eliptic flow in noncentral Pb-Pb collisions at s N N = 2.76 TeV," Physical Review Letters , vol. 111, 2013.
[2] E. Retinskaya, M. Luzum, J.-Y. Ollitrault, "Constraining models of initial conditions with elliptic and triangular flow data," Physical Review C , vol. 89, 2014.
[3] J. Xu, T. Song, C. M. Ko, F. Li, "Elliptic flow splitting as a probe of the QCD phase structure at finite baryon chemical potential," Physical Review Letters , vol. 112, 2014.
[4] B.-C. Li, L.-L. Wang, "Entropy in scalar O(n) model with a spontaneously broken symmetry," International Journal of Modern Physics A , vol. 24, no. 30, pp. 5725-5736, 2009.
[5] B.-C. Li, M. Huang, "Strongly coupled matter near phase transition," Journal of Physics G , vol. 36, 2009.
[6] C. Shen, U. W. Heinz, J.-F. Paquet, I. Kozlov, C. Gale, "Anisotropic flow of thermal photons as a quark-gluon plasma viscometer," http://arxiv.org/abs/1308.2111. In Press
[7] R. Chatterjee, H. Holopainen, I. Helenius, T. Renk, K. J. Eskola, "Elliptic flow of thermal photons from an event-by-event hydrodynamic model," Physical Review C , vol. 88, 2013.
[8] L. Bao-Chun, W. Ya-Zhou, L. Fu-Hu, W. Xin-Jian, D. You-Er, "Particle production in relativistic p p p ¯ and AA collisions at RHIC and LHC energies with Tsallis statistics using the two-cylindrical multisource thermal model," Physical Review D , vol. 89, 2014.
[9] B.-C. Li, Y.-Y. Fu, L.-L. Wang, F.-H. Liu, "Dependence of elliptic flows on transverse momentum and number of participants in Au + Au collisions at s N N = 200 GeV," Journal of Physics G , vol. 40, 2013.
[10] R. A. Soltz, I. Garishvili, M. Cheng, "Constraining the initial temperature and shear viscosity in a hybrid hydrodynamic model of s N N = 200 GeV Au + Au collisions using pion spectra, elliptic flow, and femtoscopic radii," Physical Review C , vol. 87, 2013.
[11] B.-C. Li, Y. Fu, E.-Q. Wang, L.-L. Wang, F.-H. Liu, "Transverse momentum dependence of charged and strange hadron elliptic flows in Cu-Cu collisions," Journal of Physics G , vol. 39, no. 8, 2012.
[12] W. Broniowski, W. Florkowski, "Geometric relation between centrality and the impact parameter in relativistic heavy-ion collisions," Physical Review C , vol. 65, 2002.
[13] B.-C. Li, Y.-Y. Fu, L.-L. Wang, F.-H. Liu, "Transverse momentum, centrality, and participant nucleon number dependence of elliptic flow," Advances in High Energy Physics , vol. 2013, 2013.
[14] M. L. Miller, K. Reygers, S. J. Sanders, P. Steinberg, "Glauber modeling in high-energy nuclear collisions," Annual Review of Nuclear and Particle Science , vol. 57, pp. 205-243, 2007.
[15] H. de Vries, C. W. de Jager, C. de Vries, "Nuclear charge-density-distribution parameters from elastic electron scattering," Atomic Data and Nuclear Data Tables , vol. 36, no. 3, pp. 495-536, 1987.
[16] C. Alt, T. Anticic, B. Baatar, "High transverse momentum hadron spectra at s N N = 17.3 GeV in Pb + Pb and p + p collisions," Physical Review C , vol. 77, 2008.
[17] D. Adamova, G. Agakichievb, A. Andronicet, "Elliptic flow of charged pions, protons and strange particles emitted in Pb + Au collisions at top SPS energy," Nuclear Physics A , vol. 894, pp. 41-73, 2012.
[18] C. Blume, "Recent results from the NA49 experiment," Journal of Physics G , vol. 35, 2008.
[19] G. Stefanek, C. Alt, T. Anticic, "Anisotropic flow of strange particles at SPS," in Proceedings of the 3rd Edition of the Conference Critical Point and the Onset of Deconfinement (CPOD '06), pp. 30, PoS, Florence, Italy, July 2006.
[20] M. Oldenburg, "Centrality dependence of azimuthal anisotropy of strange hadrons in 200 GeV Au + Au collisions," Journal of Physics G , vol. 32, article S563, 2006.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Copyright © 2014 Bao-Chun Li and Zhao Zhang. Bao-Chun Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The publication of this article was funded by SCOAP3 .
Abstract
In a multisource thermal model, we analyze the dependence of elliptic flow [subscript] v 2 [/subscript] on the transverse momentum [subscript] P T [/subscript] . The model results are compared with the data of [superscript] π - [/superscript] , [superscript] K S 0 [/superscript] , p , and Λ measured in Pb + Au collisions at top SPS energy, 17.3 GeV. It is found that the azimuthal anisotropy in the evolution process of high-energy collisions is correlated highly to the number of participant nucleons.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer