G. O. Bosire 1 and J. C. Ngila 1 and H. Parshotam 1,2
Academic Editor:Mohamed Abdel-Rehim
1, Department of Applied Chemistry, University of Johannesburg, P.O. Box 17011, Doornfontein, Johannesburg 2028, South Africa
2, Sustainability Department, Applied Chemistry and Microbiology, Eskom, Private Bag X40175, Cleveland 2022, South Africa
Received 10 August 2015; Revised 29 November 2015; Accepted 13 January 2016
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
1. Introduction
Given the complexity of natural organic matter (NOM) in environmental matrices [1-3], it is has been difficult, over years, to determine its characteristic behaviour in water systems. Studies in the last decade, however, have shown that NOM is made up of fractions that include biopolymers, humic substances, building blocks, low molecular weight neutrals, and low molecular weight acids [4]. This information is of particular importance because of specific chemical moieties or NOM fractions have been shown to have different interactions with other components in water, for example. The low molecular weight acids are of particular interest because they influence water chemistry (pH, ionic strength, and divalent cations), dipole-dipole interactions hydrogen bonding, and complexation reactions [5]. Undoubtedly, these considerations would make the extraction of these acids challenging. In order to choose the most appropriate extraction method that will be desirably recover most aliphatic and aromatic carboxylic acids from water, this research provided essential preliminary assessment on selected solid phase extraction methods.
Various approaches have been explored to extract carboxylic acids in natural water [6]. Clearly, the determination of carboxylic acids in water calls for an effective primary extractive stage before chromatographic analysis [7]. Some of the extraction approaches reported in literature include precipitation [8], conventional electro-dialysis [9], the liquid-liquid extraction and solid phase extraction (SPE) [10-12]. Despite all the advantages of the above mentioned methods, they still suffer from shortcomings. For example, the liquid-liquid separation techniques use solvents whose distribution coefficient are low [13, 14]. A number of SPE sorbents that extract carboxylic acids in water are commercially available [15, 16]. However, the practical merits of various extraction methods have not been exhaustive. The liquid chromatography with organic carbon detection (LC-OCD), in this study, provided information on the changes in hydrophobicity/aromaticity of NOM after the SPE separation. This would in turn confirm the removal of the carboxylic acids from water.
In this present work, we aimed to assess the extraction efficiencies of Silica, C-18 and Strata X resins for recovery of aromatic and aliphatic acids in raw water used for cooling purposes in typical power generating stations in South Africa. In addition, the aromatic/hydrophobic characteristics of the water before and after SPE extraction were compared.
Clearly, the determination of carboxylic acids in water calls for an effective primary extractive stage before chromatographic analysis [18]. Some of the extraction approaches reported in literature include precipitation [19], conventional electrodialysis [20], the liquid-liquid extraction, and solid phase extraction (SPE) [6-8]. Despite all the advantages of the above-mentioned methods, they still suffer from shortcomings. For example, the liquid-liquid separation techniques use solvents whose distribution coefficients are low [9, 10]. A number of SPE sorbents that extract carboxylic acids in water are commercially available [11, 12]. Few studies, however, report on extraction of carboxylic acids followed by chromatographic determinations. The liquid chromatography with organic carbon detection (LC-OCD), in this study, provided information on the changes in hydrophobicity/aromaticity of NOM after the SPE separation. This would in turn authenticate the removal of the carboxylic acids from water.
This study sought to assess the extraction efficiencies of silica, C-18, and Strata X resins for recovery of aromatic and aliphatic acids in raw water used for cooling purposes at Eskom, South Africa. In addition, the aromatic/hydrophobic characteristics of the water before and after SPE extraction were compared. This is part of a larger study that seeks to characterize NOM in cooling water, a step forward in building up databases of significant NOM fractions (including carboxylic acids), which govern chemical reactions that control scale formation in pipes. Eventually, an effective modelling strategy could be developed to monitor these reactions in water, at different physicochemical conditions with the view of scale minimization [4, 13]. The latter was used to assess the hydrophobicity/hydrophilicity levels of NOM as a function of these carboxylic acids in industrial cooling water.
2. Experimental
2.1. Reagents and Sorbents
In the present study, silica based C-18, silica, and Strata X resins were employed in the extraction of aliphatic and aromatic carboxylic acids prior to their GC × GC-TOFMS determination and LC-OCD assessment. All organic solvents were of GC-MS grade. Some of these (acetone, methylene chloride, tetrahydrofuran, and methanol) were obtained from Merck (Darmstadt, Germany), while others (n-hexane and n-propanol) were obtained from Sigma Aldrich (Germany). The Strata X and C-18 SPE resins were obtained from Phenomenex (Torrance, CA 90501-1430, USA). The synthesis of these SPE sorbents is reported in literature [14, 15].
2.2. Solid Phase Extraction
Three critical steps were followed in each extraction: (a) conditioning of the sorbent; (b) sample loading and isolation of the analytes; and (c) the elution step [14]. The cartridges were conditioned with 5 mL methanol and then followed by 5 mL of deionised water. Approximately 1.5-litre raw water samples were separately loaded onto the SPE columns at a rate of 10 mL/min using the vacuum manifold apparatus. The analytes were eluted from Strata X SPE by 5 mL acetone, followed by 5 mL of methylene chloride, and from the silica based cartridges using a mixture of tetrahydrofuran (THF) and methanol in a 1 : 1, v/v ratio. The eluted samples were dried in a controlled lamina flow apparatus at 25°C, reconstituted using pure methylene chloride (GC-grade), and thereafter injected into the GC for determination.
2.3. GC × GC-TOFMS
The determination of carboxylic acids from water after SPE extracted was performed using GC × GC gas chromatograph (Pegasus 4D, LECO Corporation, South Africa) with a time of flight mass spectrometer (TOFMS). The GC technique employed the RXi 5Sil-MS primary column (40 m long with internal diameter (ID) of 0.25 mm and 0.25 μ m film thickness) and the RXi 17Sil-MS secondary dimension column (4 m long with an ID of 0.25 mm and the film thickness of 0.25 μ m). Nitrogen gas, compressed air, and liquid nitrogen were used for quad-jet thermal modulator operation. The injector temperature for samples was set at 280°C, at a volume of 1 μ L on a splitless mode. Helium was used as the carrier gas at a flow rate of 1.0 mL/min and a head pressure of 90 kPa. The modulator interface temperature was set at 30°C above the secondary oven temperature. The transfer line temperature was set at 300°C and the ion source temperature at 240°C. Electron impact ionization energy was set at -70 eV with offset of 300 V totaling to the detector voltage of 1,600 V. The first-dimension column temperature was started at 55°C and held for 4.5 min, then increased to 280°C at a ramping rate of 10°C/min, and held for 4.5 min, whereas the secondary column temperature started at 75°C held for 4.5 min, then ramped to 310°C at a ramping rate of 10°C/min, and held for 4.5 min. The data was processed by identifying aliphatic and aromatic carboxylic acids with their respective unique compound masses (Q masses) on spectral databases and first- and second-dimension retention times. The MS analysis was carried out at mass range of 40-500 amu and acquisition rate was 100 spectra/sec.
2.4. The Liquid Chromatography-Organic Carbon Detection (LC-OCD)
Raw water samples filtered through SPE cartridges were analysed using LC-OCD (DOC-Labor, Karlsruhe, Germany). The raw water samples were obtained from the Vaal River which feeds Lethabo Power Station with cooling water. The LC-OCD technique, developed to identify fractions natural organic matter in water, gives quantitative information and qualitative results regarding molecular size distribution of organic matter in water [17]. The technique separates components on the basis of their molecular size [4]. Water samples were injected into a column filled with a chromatographic gel material where large molecules were eluted first followed by the smaller compounds [17]. To achieve quantification of organic carbon, organic nitrogen, and specific UV absorbance at λ -254, their responses in the samples at different retention times were measured with an organic carbon detector, organic nitrogen detector, and UV detector, respectively. Table 1 shows fractions of the natural organic matter components based on their retention times and peak areas [4]. After inline filtration through 0.45 μ m, the LC-OCD analysis was carried out following the procedure described by Huber et al., 2011 [4].
Table 1: Characteristic NOM fractions of surface water described by the LC-OCD technique [4, 17].
Fraction | Molecular mass | Characteristics |
Biopolymers | >50,000-2,000,000 g/mol | Mostly polysaccharides; not UV-absorbing; may be associated with amino acids and protein |
Humic substances | 100-10,000 g/mol | Consisting of humic acids (nonsoluble in acids, soluble in basis) and fulvic acids (soluble in acids and basis) in varying amounts |
Building blocks | 350-500 g/mol | Intermediates in degradation process fulvic acids |
Low molecular weight organic acids (LMWAs) | >1 μ m | Final degradation products of organics, but also released by algae and bacteria |
Low molecular mass neutrals and (LMWN) amphilics | >1 μ m | Slightly hydrophobic substances, such as alcohols, aldehydes, ketones, and amino acids |
Hydrophobic compounds (HOC) | >1 μ m | Difference between TOC and summarised chromatographic fractions; not detectable by chromatography; consisting probably of natural lipids, lipoids, and hopanoids |
3. Results and Discussion
Results obtained from samples extracted by silica, C-18, and Strata X cartridges and determined by first- and second-dimension chromatographic separation are presented in this section. The unique masses (Q masses), retention times, library hit similarities, and peak areas for selected carboxylic acids (especially aromatic acids) are shown in Table 2.
Table 2: Selected carboxylic acids extracted by silica, C-18, and Strata X.
GC × GC-TOFMS determinations | ||||||
Peak # | Name | Unique mass | Weight | Retention times (1st, 2nd) (sec) | Library similarity (%) | Area |
| Silica SPE | |||||
91 | Benzoic acid, 3,5-bis(1,1dimethylethyl)-4-hydroxy-ethyl ester | 263 | 278 | 676, 2.8 | 75.2 | 133966 |
92 | 1,2-Benzenedicarboxylic acid, bis(2-methyl) propyl ester | 149 | 278 | 688, 2.81 | 93.1 | 406649 |
106 | Cyclobutanecarboxylic acid, 2-tridecyl ester | 80 | 226 | 588, 2.850 | 70.5 | 495527 |
152 | Phthalic acid, di(2-propylpentyl) ester | 146 | 370 | 884, 2.730 | 75.0 | 7249 |
731 | 7-Phenylheptanoic acid | 233 | 436 | 968, 2.840 | 79.9 | 117828 |
| ||||||
| C-18 | |||||
104 | 1,2-Benzenedicarboxylic acid, bis(2-methylpropyl) ester | 149 | 278 | 688, 2.820 | 93.4 | 313930 |
287 | Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, methyl ester | 156 | 254 | 1080, 2.660 | 76.1 | 9054.8 |
316 | Phthalic acid, di(oct-3-yl) ester | 183 | 282 | 1136, 2.570 | 84.6 | 90552 |
330 | 1,2-Benzenedicarboxylic acid, butyl 2-ethylhexyl ester | 280 | 280 | 1152, 2.590 | 74.7 | 4870.7 |
350 | Phthalic acid, butyl undecyl ester | 256 | 256 | 1188, 2.520 | 89.9 | 517199 |
| ||||||
| Strata X | |||||
15 | Benzoic acid, 4-ethoxy-, ethyl ester | 121 | 194 | 536, 2.710 | 88.5 | 126885 |
117 | 1,2-Benzenedicarboxylic acid, bis(8-methylnonyl) ester | 149 | 446 | 1092, 3.08 | 74.9 | 310 |
44 | Benzenedicarboxylic acid, butyl 2-ethylhexyl ester | 149 | 334 | 724, 3.70 | 86.8 | 1045431 |
77 | Phthalic acid, di(oct-3-yl) ester | 149 | 390 | 928, 2.76 | 89.3 | 643832 |
66 | 4-Ethylbenzoic acid, 3-fluorophenyl ester | 133 | 244 | 732, 2.840 | 85.3 | 126054 |
The chromatograms of the total carboxylic acids and aromatic carboxylic acids are provided separately in the same figures (Figures 1, 2, and 3). Using deconvolution ChromaTOF software and the structured unique masses (Q masses) spectra in GC × GC-TOFMS [16, 21, 22], the coeluting carboxylic acids were also identified. Hitherto, a comparison, in terms of aliphatic and aromatic carboxylic acid extraction efficiency, was evaluated and results are discussed in this section. The hydrophilic or hydrophobic changes occurring in water after removal of carboxylic acids are shown in Table 3 and Figure 4.
Table 3: Raw and SPE filtered water characteristics.
Sample | SUVA = SAC/DOC (L/(mg [figure omitted; refer to PDF] m)) | DOC (ppb) | Fractions of dissolved organic carbon (DOC) (in %) | |||
Hydrophobic DOC | Hydrophilic DOC | Building blocks | Low molecular weight acids (LMWAs) | |||
Raw water | 3.40 | 9106 | 7.3 | 92.7 | 12.2 | NQ |
Silica filtered water | 2.88 | 1892 | 14.5 | 85.5 | 8.5 | 0.1 |
C-18 filtered water | 1.37 | 6339 | 14.7 | 77 | 4.7 | NQ |
Strata X filtered water | 2.93 | 1942 | 16.3 | 83.7 | 8.8 | 9.7 |
SUVA: specific ultraviolet absorbance.
SAC: spectral absorption coefficient.
DOC: dissolved organic carbon.
Figure 1: 2D chromatograms showing the compounds extracted in raw water using silica SPE and determined by using deconvolution ChromaTOF software in the GC × GC-TOFMS technique. Aromatic acids are shown in zoomed chromatograms to the right and indicated by arrows. The respective names, retention times, and GC-library similarities of selected carboxylic acids are tabulated (Table 2).
[figure omitted; refer to PDF]
Figure 2: 2D chromatograms showing the compounds extracted in raw water using C-18 SPE and determined by using deconvolution ChromaTOF software in the GC × GC-TOFMS technique. Aromatic acids are shown as zoomed chromatograms to the right and indicated by arrows. The respective names, retention times, and GC-library similarities of selected compounds are tabulated (Table 2).
[figure omitted; refer to PDF]
Figure 3: 2D chromatograms showing the compounds extracted in raw water using silica SPE and determined by using deconvolution ChromaTOF software in the GC × GC-TOFMS technique. Aromatic acids are shown as zoomed chromatograms to the right and indicated by arrows. The respective names, retention times, and GC-library similarities of selected carboxylic acids are tabulated (Table 2).
[figure omitted; refer to PDF]
Figure 4: The aromaticity-molecularity relationship presented on a HS diagram. A represents raw water from the Vaal River, F represents raw water filtered through silica, G represents raw water filtered through X SPE, and H represents water filtered through C-18 SPE. HS diagram presented here reveals the aromatic character ( [figure omitted; refer to PDF] -axis) of NOM fractions as a function of their molecular weights ( [figure omitted; refer to PDF] -axis). This diagram plots the spectral absorption coefficient (SAC) to the organic carbon (OC) ratio (aromaticity) of a HS fraction against its nominal molecular weight ( [figure omitted; refer to PDF] ) [4].
[figure omitted; refer to PDF]
3.1. Silica SPE Extracted Carboxylic Acids
As shown in Table 2, raw water using for cooling at Eskom chiefly contains straight-chain and branched carboxylic acids (all referred to as aliphatic carboxylic acids). The results showed a total of 42 carboxylic acids extracted by silica SPE from the Vaal River water. Of these, there are aliphatic carboxylic acids (90.48%) while aromatic acids were 9.52% of the total (Table 2 and Figure 1). These aromatic acids included 1,2-benzenedicarboxylic acid, bis(2-methyl) propyl ester; benzoic acid, 3,5-bis(1,1dimethylethyl)-4-hydroxy-ethyl ester; phthalic acid, di(2-propylpentyl) ester, and 7-phenylheptanoic acid. Comparatively, the number of aromatic carboxylic acids recovered by the silica SPE cartridge was lower than those recovered by C-18 (25%) and Strata X (28%) cartridges.
A possible explanation for the relatively large number of carboxylic acids in this river could be degradation and aggregation. Related studies have reported short and medium chain carboxylic acids due to anaerobic fermentation of organic matter [16, 18]. Clearly, microbial activity and changing physicochemical parameters (such as pH, ionic strength, and temperature) influence the distribution of NOM fractions. The result of this influence explains the fact that higher molecular weight and aromatic compounds in water degrade and aggregate forming smaller intermediates, which include carboxylic acids of varying molecular weights.
Figure 1 also shows the coeluting and closely eluting compounds. They include eicosanoic acid (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ); hexanedioic acid, bis(2-ethylhexyl) ester (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ), eicosanoic acid, 2,3-bis(acetyloxy)propyl ester (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ), 9,12,15-octadecatrienoic acid, 2-(acetyloxy)-1-[(acetyloxy)methyl]ethyl ester, (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ); octanedioic acid (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ), decanoic acid, 2-propenyl ester (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ). Some other carboxylic acids were eluted at different times in the primary dimension but at the same time in the secondary dimension. These included benzoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-ethyl ester (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ); octanedioic acid (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ) and 1,2-benzenedicarboxylic acid, bis(2-methyl) propyl ester (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ).
3.2. C-18 SPE Extracted Carboxylic Acids
The total carboxylic acids extracted by the C-18 resin were 20, 15 of which were aliphatic and 5 aromatic (Table 2 and Figure 2). The aromatic acids included 1,2-benzenedicarboxylic acid, bis(2-methylpropyl) ester (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ); benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, methyl ester (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ); phthalic acid, di(oct-3-yl) ester (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ); 1,2-benzenedicarboxylic acid, butyl 2-ethylhexyl ester (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ); phthalic acid, butyl undecyl ester (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ). Of these aromatic acids, only 1,2-benzenedicarboxylic acid, bis(2-methylpropyl) ester was extracted by both silica and C-18 solid phase extraction methods.
Aliphatic carboxylic acids were less retained on C-18 (75%) compared to silica SPE (90.48%). This is because C-18 consists of a silica surface functionalized with hydrophobic groups, which favour retention of the carboxylic acids in the reversed-phase [23, 24]. Additional studies have reported the application of the C-18 solid-phase in extraction of organic acids using the reverse phase and henceforth higher retention of those with higher hydrophobicities. The retention efficiency of C-18 was 25% for the aromatic carboxylic acids (relatively more hydrophobic) compared to silica's 9.52%. The remaining 75% of the carboxylic acids extracted using C-18 were mainly medium and long chain aliphatic acids. Except for cis-13-octadecenoic acid (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ) and 9,12-octadecadienoic acid (1st [figure omitted; refer to PDF] ; 2nd 20 [figure omitted; refer to PDF] ) that had similar retention times, the time of flight rapid separation and mass spectral signatures did not show other closely eluting or coeluting compounds.
3.3. Strata X Extraction
This Strata X polymeric resin has the capacity to adsorb both polar and nonpolar compounds with more capacity for the former [25]. It consists of copolymers that have aromatic rings in their structures which allow for electron-donor interaction between the sorbent and the [figure omitted; refer to PDF] bonds in the analyte. Therefore, this sorbent overcomes many limitations of bonded silicas because their hydrophobic surface contains a relatively large number of active aromatic sites that allow these [figure omitted; refer to PDF] interactions with aromatic carboxylic compounds. The results obtained in this study are in good agreement with literature. More aromatic carboxylic acids were retained in the Strata X than the two other sorbents (Table 2 and Figure 3). Except for m-hydroxymandelic acid, tris(trimethylsilyl), all the other aromatic acids extracted by Strata X had >70% GC-library hit similarity. The retention efficiency of aromatic acids for Strata X 28% is higher than the one obtained using C-18 (25%) and silica (9.52%). Table 2 shows a total of 25 carboxylic acids extracted by Strata X with 18 aliphatic carboxylic acids and 7 aromatic carboxylic acids. The Strata X extracted 72% aliphatic acids of the total carboxylic acids and 28% aromatic acids. Two coeluting aliphatic carboxylic acids were separated in the second dimension. These were cis-10-heptadecenoic acid (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ) and E-9-tetradecenoic acid (1st [figure omitted; refer to PDF] ; 2nd [figure omitted; refer to PDF] ) (Figure 3).
3.4. LC-OCD Characterization
First, the LC-OCD analyses were performed to identify the major fractions of NOM in raw water. Second, results showed that the concentration of NOM fractions decreased after filtration through the three SPE methods, that is, silica, C-18, and Strata X (Table 2). The decrease was more pronounced in C-18 filtered water and followed the order C-18>silica>Strata X.
The relative degrees of aromaticity against molecularities of NOM in the four water samples are presented in the humic substances diagram (HS diagram). From the results, the hydrophobicity degree of the samples depended on how much hydrophilic carboxylic acids were removed. It is worth noting that molecules with aromatic rings have higher hydrophobicities. Figure 4, which is the humic substances diagram (HS diagram), shows the relationship between molecularity and aromaticity of organic compounds in the water samples. The concentrations of the hydrophobic component followed the order Strata X>C-18>silica>raw water and the hydrophilic fraction followed the order raw water>silica>Strata X >C-18. From Figure 4, more aromatic compounds were extracted by C-18 (H on the HS diagram) followed by Strata X (F on the HS diagram). However the molecular weights of NOM components remaining in the water were higher in water extracted by Strata X. This agrees with data obtained using 2-dimensional GC.
Hydrophobicity of samples was also assessed using the specific UV absorbance at the wavelength of 254 (SUVA). The various SUVA values and the composition of the samples are tabulated in Table 3. Natural organic matter in water is reported to possess a hydrophobic characteristic, when the measured SUVA values are >4 [26, 27]. Accordingly, the aromaticity of the water samples followed the order F>G>H and the molecularity values followed the order G>F>H.
4. Conclusions
Effective characterization of raw water samples was achieved by SPE prior to GC × GC-TOFMS determination. The use of Strata-X cartridge resulted in the best recovery of aromatic carboxylic acids from raw water. This was relatively higher recovery and could be attributed to the fact that Strata X is a polymeric resin with aromatic rings in its hydrophobic structure. The silica SPE cartridge was the best in the recovery of aliphatic carboxylic acids. The total number of carboxylic acids extracted by silica SPE was 42, with aromatic acids comprising 9.52% of the total and the rest being aromatic. Accurate determination of the various carboxylic acids was achieved by the first- and second-dimension gas chromatography. The LC-OCD results confirmed that the aromaticity degrees and molecular weights NOM changed after extraction of carboxylic acids. Largely, the hydrophobicity degree of the samples depended on the type and number of carboxylic acids that were removed by the SPE cartridges.
Acknowledgments
The running cost of this research was provided by Eskom in South Africa. The authors of this paper are grateful to the Centre for Nanomaterial Science Research and Faculty of Science in the University of Johannesburg, for funding and research facilities.
Conflict of Interests
The authors declare that there is no conflict of interests regarding the publication of this paper.
[1] M. Sillanpaa, A. Matilainen, T. Lahtinen, M. Sillanpaa, "Characterization of NOM,", chapter 2 Natural Organic Matter in Water , pp. 17-53, Butterworth-Heinemann, Oxford, UK, 2015.
[2] L. Han, W. Liu, M. Chen, M. Zhang, S. Liu, R. Sun, X. Fei, "Comparison of NOM removal and microbial properties in up-flow/down-flow BAC filter," Water Research , vol. 47, no. 14, pp. 4861-4868, 2013.
[3] G. Imoberdorf, M. Mohseni, "Degradation of natural organic matter in surface water using vacuum-UV irradiation," Journal of Hazardous Materials , vol. 186, no. 1, pp. 240-246, 2011.
[4] S. A. Huber, A. Balz, M. Abert, W. Pronk, "Characterisation of aquatic humic and non-humic matter with size-exclusion chromatography-organic carbon detection-organic nitrogen detection (LC-OCD-OND)," Water Research , vol. 45, no. 2, pp. 879-885, 2011.
[5] S. Jin, Q. Zhu, S. Wei, D. Wang, "Eight salts constructed from 4-phenylthiazol-2-amine and carboxylic acid derivatives through combination of strong hydrogen bonding and weak noncovalent interactions," Journal of Molecular Structure , vol. 1049, pp. 132-148, 2013.
[6] E. Fernandez, L. Vidal, F. J. H. Fernandez, A. P. De Los Rios, "Liquid-phase extraction and microextraction,", chapter 3 Ionic Liquids in Separation Technology , pp. 107-152, Elsevier, Amsterdam, The Netherlands, 2014.
[7] S. Yang, H. Huang, A. Tay, W. Qin, L. Guzman, E. San Nicolas, S.-T. Yang, "Extractive fermentation for the production of carboxylic acids,", chapter 16 Bioprocessing for Value-Added Products from Renewable Resources , pp. 421-446, Elsevier, Amsterdam, The Netherlands, 2007.
[8] A. Keshav, S. Chand, K. L. Wasewar, "Recovery of propionic acid from aqueous phase by reactive extraction using quarternary amine (Aliquat 336) in various diluents," Chemical Engineering Journal , vol. 152, no. 1, pp. 95-102, 2009.
[9] V. Kislik, V. S. Kislik, "Examples of application of solvent extraction techniques in chemical, radiochemical, biochemical, pharmaceutical, analytical separations, and wastewater treatment,", chapter 5 Solvent Extraction , pp. 185-314, Elsevier, Amsterdam, The Netherlands, 2012.
[10] S. Moldoveanu, V. David, S. M. David, "Solvent extraction,", chapter 6 Modern Sample Preparation for Chromatography , pp. 131-189, Elsevier, Amsterdam, The Netherlands, 2015.
[11] M. R. Pourjavid, A. A. Sehat, M. Arabieh, S. R. Yousefi, M. H. Hosseini, M. Rezaee, "Column solid phase extraction and flame atomic absorption spectrometric determination of manganese(II) and iron(III) ions in water, food and biological samples using 3-(1-methyl-1H-pyrrol-2-yl)-1H-pyrazole-5-carboxylic acid on synthesized graphene oxide," Materials Science and Engineering C , vol. 35, no. 1, pp. 370-378, 2014.
[12] V. Dufkova, R. Cabala, V. Sevcik, "Determination of C5-C12 perfluoroalkyl carboxylic acids in river water samples in the Czech Republic by GC-MS after SPE preconcentration," Chemosphere , vol. 87, no. 5, pp. 463-469, 2012.
[13] G. Metreveli, G. Abbt-Braun, F. H. Frimmel, "Influence of NOM on the mobility of metal(loid)s in water-saturated porous media," Aquatic Geochemistry , vol. 16, no. 1, pp. 85-100, 2010.
[14] K. Bielicka-Daszkiewicz, A. Voelkel, M. Szejner, J. Osypiuk, "Extraction properties of new polymeric sorbents in SPE/GC analysis of phenol and hydroquinone from water samples," Chemosphere , vol. 62, no. 6, pp. 890-898, 2006.
[15] M. N. Qureshi, G. Stecher, C. Huck, G. K. Bonn, "Preparation of polymer based sorbents for solid phase extraction of polyphenolic compounds," Central European Journal of Chemistry , vol. 9, no. 2, pp. 206-212, 2011.
[16] H. C. Reinardy, A. G. Scarlett, T. B. Henry, C. E. West, L. M. Hewitt, R. A. Frank, S. J. Rowland, "Aromatic naphthenic acids in oil sands process-affected water, resolved by GCxGC-MS, only weakly induce the gene for vitellogenin production in zebrafish (Danio rerio) larvae," Environmental Science and Technology , vol. 47, no. 12, pp. 6614-6620, 2013.
[17] A. Batsch, D. Tyszler, A. Brügger, S. Panglisch, T. Melin, "Foulant analysis of modified and unmodified membranes for water and wastewater treatment with LC-OCD," Desalination , vol. 178, no. 1-3, pp. 63-72, 2005.
[18] B. Jurado-Sanchez, E. Ballesteros, M. Gallego, "Determination of carboxylic acids in water by gas chromatography using several detectors after flow preconcentration," Journal of Chromatography A , vol. 1217, no. 47, pp. 7440-7447, 2010.
[19] H. Fu, Y. Sun, H. Teng, D. Zhang, Z. Xiu, "Salting-out extraction of carboxylic acids," Separation and Purification Technology , vol. 139, pp. 36-42, 2015.
[20] S.-I. Ohira, K. Kuhara, A. Shigetomi, T. Yamasaki, Y. Kodama, P. K. Dasgupta, K. Toda, "On-line electrodialytic matrix isolation for chromatographic determination of organic acids in wine," Journal of Chromatography A , vol. 1372, pp. 18-24, 2014.
[21] E. Skoczynska, P. Korytar, J. De Boer, "Maximizing chromatographic information from environmental extracts by GCxGC-ToF-MS," Environmental Science and Technology , vol. 42, no. 17, pp. 6611-6618, 2008.
[22] R. Costa, C. Fanali, G. Pennazza, L. Tedone, L. Dugo, M. Santonico, D. Sciarrone, F. Cacciola, L. Cucchiarini, M. Dacha, L. Mondello, "Screening of volatile compounds composition of white truffle during storage by GCxGC-(FID/MS) and gas sensor array analyses," LWT-Food Science and Technology , vol. 60, no. 2, pp. 905-913, 2015.
[23] J.-P. Simjouw, E. C. Minor, K. Mopper, "Isolation and characterization of estuarine dissolved organic matter: comparison of ultrafiltration and C18 solid-phase extraction techniques," Marine Chemistry , vol. 96, no. 3-4, pp. 219-235, 2005.
[24] Y. Li, X. Xie, M. L. Lee, J. Chen, "Preparation and evaluation of hydrophilic C18 monolithic sorbents for enhanced polar compound retention in liquid chromatography and solid phase extraction," Journal of Chromatography A , vol. 1218, no. 48, pp. 8608-8616, 2011.
[25] C. Sky, S. David, T. James, "High recoveries of phenols from water with the new polymeric SPE sorbent- strata (TM) X," Application Note , no. TN-001, Phenomenex, Torrance, Calif, USA, 2002.
[26] E. Filloux, H. Gallard, J.-P. Croue, "Identification of effluent organic matter fractions responsible for low-pressure membrane fouling," Water Research , vol. 46, no. 17, pp. 5531-5540, 2012.
[27] S. Zhou, Y. Shao, N. Gao, L. Li, J. Deng, C. Tan, M. Zhu, "Influence of hydrophobic/hydrophilic fractions of extracellular organic matters of Microcystis aeruginosa on ultrafiltration membrane fouling," Science of the Total Environment , vol. 470-471, pp. 201-207, 2014.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer
Copyright © 2016 G. O. Bosire et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Abstract
The extraction and determination of aliphatic and aromatic carboxylic acids as well as their influence on the aromaticity and molecularity relationship of natural organic matter (NOM) in water are reported in this study. Three solid phase extraction (SPE) sorbents were used and their extraction efficiencies evaluated after chromatographic determinations (using gas chromatography with a time of flight mass spectrometer (GC × GC-TOFMS) and liquid chromatography with organic carbon detector (LC-OCD)). More than 42 carboxylic acids were identified in raw water from the Vaal River, which feeds the Lethabo Power Generation Station, South Africa, with cooling water. The aromatic carboxylic acid efficiency (28%) was achieved by using Strata(TM) X SPE while the highest aliphatic carboxylic acid efficiency (92.08%) was achieved by silica SPE. The hydrophobic nature of NOM in water depends on the nature of organic compounds in water, whether aromatic or aliphatic. The LC-OCD was used to assess the hydrophobicity levels of NOM as a function of these carboxylic acids in cooling water. The LC-OCD results showed that the aromatic nature of NOM in SPE filtered water followed the order Silica>Strata X>C-18. From the results, the hydrophobicity degree of the samples depended on the type and number of carboxylic acids that were removed by the SPE cartridges.
You have requested "on-the-fly" machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Show full disclaimer
Neither ProQuest nor its licensors make any representations or warranties with respect to the translations. The translations are automatically generated "AS IS" and "AS AVAILABLE" and are not retained in our systems. PROQUEST AND ITS LICENSORS SPECIFICALLY DISCLAIM ANY AND ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES FOR AVAILABILITY, ACCURACY, TIMELINESS, COMPLETENESS, NON-INFRINGMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your use of the translations is subject to all use restrictions contained in your Electronic Products License Agreement and by using the translation functionality you agree to forgo any and all claims against ProQuest or its licensors for your use of the translation functionality and any output derived there from. Hide full disclaimer